Provider-RP#show ip pim interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prior 10.0.0.204 Loopback0 v2/S 0 30 1 10.0.0.204 10.0.0.34 Ethernet2/0 v2/S 1 30 1 10.0.0.34 10.0.0.38 Ethernet2/1 v2/S 1 30 1 10.0.0.38 Provider-RP(config)#int Lo0 Provider-RP(config-if)#no ip pim sparse-mode Provider-RP(config)#int e2/0 Provider-RP(config-if)#no ip pim sparse-mode *Nov 27 09:04:30.118: %PIM-5-NBRCHG: neighbor 10.0.0.33 DOWN on interface Ethernet2/0 non DR Provider-RP(config-if)#int e2/1 Provider-RP(config-if)#no ip pim sparse-mode *Nov 27 09:04:47.529: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down *Nov 27 09:04:47.530: %PIM-5-NBRCHG: neighbor 10.0.0.37 DOWN on interface Ethernet2/1 non DR Provider-RP#show run | s candidate ip pim bsr-candidate Loopback0 0 ip pim rp-candidate Loopback0 group-list 1 Provider-RP(config)#no access-list 1 Provider-RP(config)#no ip pim bsr-candidate Loopback0 Provider-RP(config)#no ip pim rp-candidate Loopback0 group-list 1 Provider-RP#show ip pim neighbor PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode Provider-RP#show ip mroute | i enabled IP Multicast Forwarding is not enabled. P1#show run | s multi ip multicast-routing multilink bundle-name authenticated P1#show run | s multicast ip multicast-routing P1(config)#no ip multicast-routing P1(config)#do show ip pim interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prior 10.0.0.201 Loopback0 v2/S 0 30 1 10.0.0.201 10.0.0.9 FastEthernet0/0 v2/S 1 30 1 10.0.0.10 10.0.0.13 FastEthernet0/1 v2/S 1 30 1 10.0.0.14 10.0.0.1 FastEthernet1/0 v2/S 1 30 1 10.0.0.2 10.0.0.5 FastEthernet1/1 v2/S 1 30 1 10.0.0.6 10.0.0.33 FastEthernet2/1 v2/S 0 30 1 10.0.0.33 P1(config)#int range fa0/0 - 1 P1(config-if-range)#no ip pim sparse-mode *Nov 27 10:11:03.571: %PIM-5-NBRCHG: neighbor 10.0.0.10 DOWN on interface FastEthernet0/0 DR *Nov 27 10:11:03.675: %PIM-5-NBRCHG: neighbor 10.0.0.14 DOWN on interface FastEthernet0/1 DR P1(config-if-range)#int range fa1/0 - 1 P1(config-if-range)#no ip pim sparse-mode *Nov 27 10:11:16.323: %PIM-5-NBRCHG: neighbor 10.0.0.2 DOWN on interface FastEthernet1/0 DR *Nov 27 10:11:16.475: %PIM-5-NBRCHG: neighbor 10.0.0.6 DOWN on interface FastEthernet1/1 DR P1(config)#int fa2/1 P1(config-if)#no ip pim sparse-mode P1(config)#int Lo0 P1(config-if)#no ip pim sparse-mode P1#show ip pim neighbor PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode P2#show run | s multi ip multicast-routing multilink bundle-name authenticated P2#show run | s multicast ip multicast-routing P2(config)#no ip multicast-routing P2(config)# P2(config)# P2(config)#do show ip pim interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prior 10.0.0.202 Loopback0 v2/S 0 30 1 10.0.0.202 10.0.0.17 FastEthernet0/0 v2/S 1 30 1 10.0.0.18 10.0.0.25 FastEthernet0/1 v2/S 1 30 1 10.0.0.26 10.0.0.2 FastEthernet1/0 v2/S 0 30 1 10.0.0.2 10.0.0.41 FastEthernet1/1 v2/S 1 30 1 10.0.0.42 10.0.0.37 FastEthernet2/1 v2/S 0 30 1 10.0.0.37 P2(config)#int range fa0/0 - 1 P2(config-if-range)#no ip pim sparse-mode *Nov 27 10:19:19.879: %PIM-5-NBRCHG: neighbor 10.0.0.18 DOWN on interface FastEthernet0/0 DR *Nov 27 10:19:20.023: %PIM-5-NBRCHG: neighbor 10.0.0.26 DOWN on interface FastEthernet0/1 DR P2(config)#int range fa1/0 - 1 P2(config-if-range)#no ip pim sparse-mode *Nov 27 10:19:32.183: %PIM-5-NBRCHG: neighbor 10.0.0.42 DOWN on interface FastEthernet1/1 DR P2(config-if-range)#int fa2/1 P2(config-if)#no ip pim sparse-mode P2(config)#int Lo0 P2(config-if)#no ip pim sparse-mode P2#show ip pim neighbor PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode P3#show run | s multicast ip multicast-routing Enter configuration commands, one per line. End with CNTL/Z. P3(config)#no ip multicast-routing P3(config)#do show ip pim interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prior 10.0.0.203 Loopback0 v2/S 0 30 1 10.0.0.203 10.0.0.21 FastEthernet0/0 v2/S 1 30 1 10.0.0.22 10.0.0.29 FastEthernet0/1 v2/S 1 30 1 10.0.0.30 10.0.0.42 FastEthernet1/0 v2/S 0 30 1 10.0.0.42 10.0.0.6 FastEthernet1/1 v2/S 0 30 1 10.0.0.6 P3(config)#int range fa0/0 - 1 P3(config-if-range)#no ip pim sparse-mode *Nov 27 10:33:31.483: %PIM-5-NBRCHG: neighbor 10.0.0.22 DOWN on interface FastEthernet0/0 DR *Nov 27 10:33:31.615: %PIM-5-NBRCHG: neighbor 10.0.0.30 DOWN on interface FastEthernet0/1 DR P3(config)#int ra fa1/0 - 1 P3(config-if-range)#no ip pim sparse-mode P3(config)#int Lo0 P3(config-if)#no ip pim sparse-mode P3#show ip pim nei P3#show ip pim neighbor PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode PE1#show run | s multicast ip multicast-routing ip multicast-routing vrf C-ONE PE1(config)#no ip multicast-routing PE1(config)#do show ip pim interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prior 10.0.0.101 Loopback0 v2/S 0 30 1 10.0.0.101 10.0.0.10 FastEthernet0/0 v2/S 0 30 1 10.0.0.10 PE1(config)#int Lo0 PE1(config-if)#no ip pim sparse-mode *Nov 27 10:44:47.459: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel1, changed state to down PE1(config)#int fa0/0 PE1(config-if)#no ip pim sparse-mode PE1#show ip pim neighbor PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode PE2#show run | s multicast ip multicast-routing ip multicast-routing vrf C-ONE PE2(config)#no ip multicast-routing PE2(config)#do show ip pim interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prior 10.0.0.102 Loopback0 v2/S 0 30 1 10.0.0.102 10.0.0.14 FastEthernet0/1 v2/S 0 30 1 10.0.0.14 PE2(config)#int Lo0 PE2(config-if)#no ip pim sparse-mode *Nov 27 10:46:49.963: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel1, changed state to down PE2(config)#int fa0/0 PE2(config-if)#no ip pim sparse-mode PE2(config)#do show ip pim neighbor PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode PE3#show run | s multicast ip multicast-routing ip multicast-routing vrf C-ONE PE3(config)#no ip multicast-routing PE3(config)#do show ip pim interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prior 10.0.0.103 Loopback0 v2/S 0 30 1 10.0.0.103 10.0.0.18 FastEthernet0/0 v2/S 0 30 1 10.0.0.18 PE3(config)#int Lo0 PE3(config-if)#no ip pim sparse-mode *Nov 27 2017 10:51:04.403 ITALY: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel1, changed state to down PE3(config)#int fa0/0 PE3(config-if)#no ip pim sparse-mode *Nov 27 2017 10:51:13.259 ITALY: %SYS-5-CONFIG_I: Configured from console by console PE3#show ip pim neighbor PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR PE4#show run | s multicast ip multicast-routing ip multicast-routing vrf C-ONE PE4(config)#no ip multicast-routing PE4(config)#do show ip pim interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prior 10.0.0.104 Loopback0 v2/S 0 30 1 10.0.0.104 10.0.0.22 FastEthernet0/0 v2/S 0 30 1 10.0.0.22 PE4(config)#int Lo0 PE4(config-if)#no ip pim sparse-mode *Nov 27 10:53:21.923: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down PE4(config-if)#int fa0/0 PE4(config-if)#no ip pim sparse-mode PE4#show ip pim neighbor PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode PE5#show run | s multicast ip multicast-routing ip multicast-routing vrf C-ONE PE5(config)#no ip multicast-routing PE5(config)#do show ip pim interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prior 10.0.0.105 Loopback0 v2/S 0 30 1 10.0.0.105 10.0.0.26 FastEthernet0/1 v2/S 0 30 1 10.0.0.26 PE5(config)#int Lo0 PE5(config-if)#no ip pim sparse-mode *Nov 27 10:58:19.915: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down PE5(config-if)#int fa0/1 PE5(config-if)#no ip pim sparse-mode PE5#show ip pim neighbor PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode PE6#show run | s multicast ip multicast-routing ip multicast-routing vrf C-ONE PE6(config)#no ip multicast-routing PE6(config)#do show ip pim interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prior 10.0.0.106 Loopback0 v2/S 0 30 1 10.0.0.106 10.0.0.30 FastEthernet0/1 v2/S 0 30 1 10.0.0.30 PE6(config)#int Lo0 PE6(config-if)#no ip pim sparse-mode *Nov 27 11:01:09.703: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel1, changed state to down PE6(config)#int fa0/1 PE6(config-if)#no ip pim sparse-mode PE6#show ip pim neighbor PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode PE1(config)#router bgp 100 PE1(config-router)#no address-family ipv4 mdt *Nov 27 11:12:26.175: %BGP_SESSION-5-ADJCHANGE: neighbor 10.0.0.204 IPv4 MDT topology base removed from session Neighbor deleted PE2(config)#router bgp 100 PE2(config-router)#no address-family ipv4 mdt *Nov 27 11:14:02.247: %BGP_SESSION-5-ADJCHANGE: neighbor 10.0.0.204 IPv4 MDT topology base removed from session Neighbor deleted PE3(config)#router bgp 100 PE3(config-router)#no address-family ipv4 mdt *Nov 27 11:15:06.607: %BGP_SESSION-5-ADJCHANGE: neighbor 10.0.0.204 IPv4 MDT topology base removed from session Neighbor deleted PE4(config)#router bgp 100 PE4(config-router)#no address-family ipv4 mdt *Nov 27 11:16:29.495: %BGP_SESSION-5-ADJCHANGE: neighbor 10.0.0.204 IPv4 MDT topology base removed from session Neighbor deleted PE5(config)#router bgp 100 PE5(config-router)#no address-family ipv4 mdt *Nov 27 11:17:46.975: %BGP_SESSION-5-ADJCHANGE: neighbor 10.0.0.204 IPv4 MDT topology base removed from session Neighbor deleted PE6(config)#router bgp 100 PE6(config-router)#no address-family ipv4 mdt *Nov 27 11:19:12.895: %BGP_SESSION-5-ADJCHANGE: neighbor 10.0.0.204 IPv4 MDT topology base removed from session Neighbor deleted Provider-RP(config)#router bgp 100 Provider-RP(config-router)#no address-family ipv4 mdt